Maximum Bulk/Use Temp. | 260°C | 500°F |
Maximum Film Temp. | 287°C | 550°F |
Pour Point ASTM D97 | -40°C | -40°F |
Engineered thermal fluid formulated as a better alternative to the UCON 500® PolyAlkylene Glycol Fluid. Unlike its predecessor which has a low oxidative stability and a short service life, Relatherm PAG is a premium PolyAlkylene Glycol heat transfer fluid infused with a proprietary additive formula that gives it a considerably longer service life, extreme resistance to oxidation and a much lower degradation tendency. For this reason, it is a popular choice in many open baths and non-blanketed systems.
PRODUCT SUMMARY
- Great choice for open bath applications and other oxidation-prone systems
- Maximum use temperature: 260ºC / 500°F
- Flash point: 248ºC / 480°F
- Higher performance and longer service life compared to industry PAG thermal fluids like UCON 500®.
- Fully compatible with mineral-oil based thermal fluids. No flush or special changeover procedures required.
Technical Documents
Thermal Expansion Coefficient | 0.0679 %/°C | 0.0377 %/°F |
Thermal Conductivity | W/m K | BTU/hr F ft |
38°C / 100°F | 0.181 | 0.105 |
121°C / 250°F | 0.173 | 0.100 |
260°C / 500°F | 0.160 | 0.092 |
Heat Capacity | kJ/kg K | BTU/lb F |
38°C / 100°F | 1.976 | 0.472 |
121°C / 250°F | 2.063 | 0.493 |
260°C / 500°F | 2.207 | 0.528 |
Flash Point ASTM D92 | 248°C | 480°F |
Fire Point ASTM D92 | 284°C | 505°F |
Autoignition ASTM E-659-78 | 373°C | 690°F |
Viscosity ASTM D445 | ||
cSt at 40°C / 104°F | 42.10 | |
cSt at 121°C / 250°F | 5.16 | |
cSt at 260°C / 500°F | 1.23 | |
Density ASTM D1298 | kg/m3 | lb/ft3 |
38°C / 100°F | 920.28 | 57.46 |
121°C / 250°F | 896.85 | 55.99 |
260°C / 500°F | 857.61 | 53.54 |
Vapor Pressure ASTM D2879 | kPa | psi |
38°C / 100°F | 0.20 | 0.04 |
121°C / 250°F | 0.93 | 0.16 |
260°C / 500°F | 3.40 | 0.51 |
Distillation Range ASTM D2887 | 10% | 367°C (694°F) |
90% | 513°C (957°F) |
THE RELATHERM ADVANTAGE
Relatherm PAG’s proprietary additive system sets it apart from other industry fluids. Its advanced thermofluid technology was designed with demanding applications and full compatibility in mind. It has an exceptionally long service life in typically problematic applications including die casting, plastic processing, textiles manufacturing etc.
Relatherm PAG is also compatible with most mineral-oil based heat transfer fluids. As such, changeovers are seamless. In comparison with other industry fluids, it provides a higher performance and a much safer, cleaner, and thermally stable equipment operation for a longer period of time.
EXTENDED FLUID LIFE
Relatherm PAG is well known for it extended service life, even in oxidation-prone systems. Its superior additive technology extends its usability under operating conditions at which other industry fluids would typically degrade.
MAXIMUM OXIDATION PROTECTION
Relatherm PAG greatly minimizes sludge formation in heat transfer systems and the fouling of heat transfer surfaces by virtue of its robust additive technology. It features industry-leading two-stage anti-oxidation additive package and a complimentary mix of metal deactivators, rust inhibitors, defoamers, seal/gasket extenders and other proprietary agents. For many systems, Relatherm PAG provides lower maintenance costs, longer uptime and less frequent fluid changeouts.
HEALTH, SAFETY & THE ENVIRONMENT
Relatherm PAG is non-toxic, non-hazardous and less odorous when compared to popular brands. It is also environmentally friendly and poses no adverse effect to personnel safety.
COMPREHENSIVE PRODUCT PORTFOLIO
If Relatherm PAG does not meet your application requirements, there is a very good chance that we will be able to offer a better suited solution from our comprehensive portfolio of thermal fluids and system cleaners. Contact us to discuss your application with a Thermal Fluids Expert.