|Maximum Bulk/Use Temp.||232°C||450°F|
|Maximum Film Temp.||254°C||490°F|
|Pour Point ASTM D97||-45°C||-49°F|
Engineered thermal fluid designed for food-grade applications and equipment with a low-to-medium temperature range specification. It is also commonly used for dual cycle systems needing simultaneous heating and cooling. It features the Relatherm Advanced Extended Life Additive Technology which gives it an uncommon durability.
- Food Grade – Meets USDA requirements for incidental food contact (H1) and FDA requirements as set out in 21CFR Section 178.3570.
- Maximum use temperature: 232ºC / 450°F
- Flash Point : 150ºC /302°F
- Non-toxic and non-hazardous heat transfer fluid
- Ultra-pure componentry
|Thermal Expansion Coefficient||0.1016 %/°C||0.0564 %/°F|
|Thermal Conductivity||W/m K||BTU/hr F ft|
|-40°C / -40°F||0.148||0.085|
|-18°C / 0°F||0.146||0.085|
|38°C / 100°F||0.142||0.082|
|121°C / 250°F||0.136||0.079|
|232°C / 450°F||0.129||0.074|
|Heat Capacity||kJ/kg K||BTU/lb F|
|-40°C / -40°F||1.905||0.455|
|-18°C / 0°F||1.972||0.472|
|38°C / 100°F||2.142||0.512|
|121°C / 250°F||2.394||0.572|
|232°C / 450°F||2.731||0.653|
|Flash Point ASTM D92||150°C||302°F|
|Fire Point ASTM D92||163°C||327°F|
|Autoignition ASTM E-659-78||329°C||625°F|
|Viscosity ASTM D445|
|cSt at -40°C / -40°F||140.36|
|cSt at -18°C / 0°F||45.77|
|cSt at 40°C / 104°F||4.61|
|cSt at 121°C / 250°F||1.42|
|cSt at 232°C / 450°F||0.67|
|Density ASTM D1298||kg/m3||lb/ft3|
|-40°C / -40°F||905.54||56.53|
|-18°C / 0°F||890.50||55.58|
|38°C / 100°F||852.23||53.21|
|121°C / 250°F||795.51||49.66|
|232°C / 450°F||722.38||44.92|
|Vapor Pressure ASTM D2879||kPa||psi|
|-40°C / -40°F||0.00||0.00|
|-18°C / 0°F||0.00||0.00|
|38°C / 100°F||0.58||0.08|
|121°C / 250°F||2.13||0.31|
|232°C / 450°F||20.62||3.00|
|Distillation Range ASTM D2887||10%||263°C (505°F)|
|Average Molecular Weight||372|
WHY RELATHERM MT-FG?
Relatherm MT-FG is manufactured from ultra-pure food-grade base fluids and the most advanced life-extending additive technology. In comparison with other industry fluids, it provides for a safer, cleaner, and thermally stable equipment operation. More specifically, Relatherm MT-FG features the industry-leading two-stage anti-oxidation additive package and a complimentary mix of metal deactivators, rust inhibitors, defoamers, seal/gasket extenders and other proprietary agents. This superior formulation provides trouble-free operation and efficient heat transfer.
LONGER FLUID LIFE
Relatherm MT-FG lasts longer in service even in oxidation-prone systems. Its superior additive technology extends its usability under operating conditions at which other industry fluids would typically degrade.
MAXIMUM OXIDATION PROTECTION
By virtue of its industry-leading additive technology, Relatherm MT-FG greatly minimizes sludge formation in heat transfer systems and carbon deposition on heat transfer surfaces. It contains highly effective oxidation mitigants, making it the best choice for applications in food processing, food packaging and pharmaceutical processing. For these systems, Relatherm MT-FG mean lower maintenance costs, longer uptime and less frequent fluid changeouts.
HEALTH, SAFETY & THE ENVIRONMENT
Relatherm MT-FG is non-toxic and non-hazardous. It is environmentally friendly and poses no adverse effect to personnel safety. There are no special handling procedures or disposal. After its long-service life, it can be disposed with other waste oils/lubricants in accordance with applicable statutes.
COMPREHENSIVE PRODUCT PORTFOLIO
If Relatherm MT-FG does not meet your application requirements, there is a very good chance that we will be able to offer a better suited solution from our comprehensive portfolio of thermal fluids and system cleaners. Contact us to discuss your application with a Thermal Fluids Expert.